Cisco OL-4015-08 User Manual page 78

Delete
Summary
Details
Enable/Disable
Test Connection
Interface List
Cisco Router and Security Device Manager Version 2.2 User's Guide
4-2
Selecting a connection and clicking Delete displays a dialog box informing you
of the associations this connection has and asking you if you want to remove the
associations along with the connection. You can delete just the connection, or the
connection and all of its associations.
Clicking the Summary button hides the details about the connection, restricting
the information to the IP address, Type, Slot, Status, and Description.
Clicking Details displays the Details About Interface area, described next. Details
about the interface are shown by default.
When you select an interface and click this button, the interface will be
administratively shut down or brought up depending on its current state. This
button will be disabled when you select an interface whose configuration has not
been delivered to the router.
Click to test the selected connection. A dialog appears that enables you to specify
a remote host to ping through this connection. The dialog then reports on the
success or failure of the test. If the test fails, information about why the test may
have failed is given, along with the steps you need to take to correct the problem.
The interface list displays the physical interfaces and logical connections to which
they are configured.
Interfaces
This column lists the physical and logical interfaces by name. If a
has been configured for a
the physical interface.
physical interface, the logical interface is shown under
Chapter 4 Edit Interface/Connection
logical interface
OL-4015-08