Cisco OL-4015-08 User Manual page 508

Rules Windows
Destination
Service
Attributes
Description
What do you want to do?
If you want to:
Add a rule.
Edit a rule, or edit a rule entry.
Associate a rule with an interface.
Cisco Router and Security Device Manager Version 2.2 User's Guide
24-6
For extended rules, the destination IP address criteria that the traffic must match.
The address may be for a network, or a specific host. This column may contain:
An IP address and
•
wildcard mask specifies how much of the rule's IP address the IP address in
the packet must match.
The keyword any. Any indicates that the source IP address can be any IP
•
address
A host name.
•
For extended rules, the service specifies the type of traffic that packets matching
the rule must contain. This is shown by displaying the service, such as echo-reply,
followed by the protocol, such as ICMP. A rule permitting or denying multiple
services between the same end points must contain an entry for each service.
This field can contain other information about this entry, such as whether logging
has been enabled.
A short description of the entry.
Do this:
Click the Add button and create the rule in the windows
displayed.
Select the access rule and click Edit. Then edit the rule in the
Edit rule window displayed.
See
wildcard mask. The IP address specifies a network, and the
How Do I Associate a Rule with an Interface?
Chapter 24 ACL Editor
OL-4015-08