Host And Network Fields - Cisco OL-4015-08 User Manual

Chapter 30 More About....

Host and Network Fields

OL-4015-08
When a network address is displayed in SDM windows, the IP address and subnet
mask for it may be shown in network address/subnet bits format, as in the
following example:
172.28.33.0/24
The network address in this example is 172.28.33.0. The number 24 indicates the
number of subnet bits used. You can think of it as shorthand for the corresponding
subnet mask of 255.255.255.0.
Addresses used on the public Internet must be completely unique for the period
of time they are being used. On private networks, addresses may be unique only
to the private network or subnetwork.
Addresses may also be translated by using schemes such as
they may be temporarily assigned using DHCP. You can use SDM to configure
NAT, PAT and DHCP.
This topic explains how to supply host or network information in windows that
allow you to specify a network or host address, or a host name.
Specify the network or the host.
Type
One of the following:
A Network—If you select this, provide a network address in the IP address
•
field. Note that the wildcard mask enables you to enter a network number that
may specify multiple subnets.
A Host Name or IP Address—If you select this, provide a host IP address
•
or host name in the next field.
Any IP address—The action you specified is to apply to any host or network.
•
Cisco Router and Security Device Manager Version 2.2 User's Guide
IP Addresses and Subnet Masks
NAT and PAT, and
30-3