Connection: Subinterfaces - Cisco OL-4015-08 User Manual

Chapter 4 Edit Interface/Connection
VLAN ID
Native VLAN Checkbox
IP Address Fields

Connection: Subinterfaces

OL-4015-08
Enter the ID number of the new VLAN interface. If you are editing a VLAN
interface, you cannot change the VLAN ID.
Check if this VLAN is a nontrunking VLAN.
IP Address Type
Select whether this VLAN interface will have a static IP address or no IP address.
This field is visible when VLAN only is selected in the Configure As field.
IP Address
Enter the IP address of the VLAN interface.
Subnet Mask
Enter the subnet mask of the VLAN interface, or indicate the number of subnet
bits using the scrolling field.
DHCP Relay
Click DHCP Relay for more information.
This window displays the subinterfaces configured for the interface that you
chose, and enables you to add, edit, and remove configured subinterfaces. For
each configured subinterface, the window displays the Subinterface ID, VLAN
ID, IP address and mask, and a description, if one has been entered. For example,
if the router had the interface FastEthernet 1, and the subinterfaces
FastEthernet1.3 and FastEthernet1.5 were configured, this window might contain
the following display
5 56 56.8.1.1/255.255.255.0
3 67 Bridge No. 77
Cisco Router and Security Device Manager Version 2.2 User's Guide
Connection: Subinterfaces
4-17