How Do I Permit Specific Traffic Through A Dmz Interface - Cisco OL-4015-08 User Manual

Chapter 5 Create Firewall

How Do I Permit Specific Traffic Through a DMZ Interface?

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
OL-4015-08
access-list 105 permit udp host 123.3.4.5 host 192.168.0.1 eq isakmp
access-list 105 permit udp host 123.3.4.5 host 192.168.0.1 eq
non500-isakmp
Follow the steps below to configure access through your firewall to a web server
on a DMZ network:
From the left frame, select Firewall and ACL.
Select Advanced Firewall.
Click Launch the Selected Task.
Click Next.
The Advanced Firewall Interface Configuration screen appears.
In the Interface table, select which interfaces connect to networks inside your
firewall and which interfaces connect to networks outside the firewall.
From the DMZ Interface field, select the interface that connects to your DMZ
network.
Click Next>.
In the IP Address field, enter the IP address or range of IP addresses of your web
server(s).
From the Service field, select TCP.
In the Port field, enter 80 or www.
Click Next>.
Click Finish.
Cisco Router and Security Device Manager Version 2.2 User's Guide
How Do I...
5-15