Disassembling And Assembling The Gearshift Forks - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
7 Disassembling and assembling the
gearshift forks
Special tools and workshop equipment required
♦ Driver - MP1-304 (10-206)-
♦ Pressure plate - MP3-407 (VW 402)-
♦ Pressure spindle - MP3-448 (VW 408 A)-
♦ Thrust piece - MP3-453 (VW 431)-
♦ Pressure washer - MP3-455 (VW 447 H)-
♦ Distance sleeve - MP3-458 (VW 472)-
♦ Removal tool for inner lining of the door panel - MP8-602/1-
Note
The gearshift fork group with shift rails (-Pos. 1-) must not be disassembled for the disassembly and assembly
of the shift segments, clamping plates and angular ball bearings.
1 - Gearshift fork group with
shift rails
2 - 3rd/4th gear shift segment
❑ Identification
⇒ page 133
❑ It must still be possible
to rotate the shift seg‐
ment freely once fitted
3 - Angular ball bearing
❑ 4 pieces
❑ pressing off
⇒ page 134
❑ installing ⇒ page 134
4 - Circlip
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
❑ removing ⇒ page 133
❑ installing ⇒ page 134
5 - 1st/2nd gear shift segment
❑ Identification
⇒ page 133
❑ It must still be possible
to rotate the shift seg‐
ment freely once the cir‐
clip has been fitted
❑ Gearshift fork with shift
segments
6 - 5th gear shift fork with shift
segments
❑ Shift segments are con‐
nected inseparably with
the gearshift fork
❑ Identification ⇒ page 133
132