Play Logo Settings - evertz 7812UDXD Series Manual

User1
User2
User3
User4
User5
User6
User7
User8
User9
User10
The Recall Preset control is used to set which preset will be recalled by the respective GPI input if it is
closed to ground.
GPI settings are also stored in the User Presets in addition to the other settings. If the

GPI settings are not the same for each video input and output combination, unexpected
results may occur. In other words, make sure your GPI settings are the same for each
User Preset.

6.25.3. Play Logo Settings

To use GPIO1 as a GPI and to further configure it for playing a particular logo, click on the Play Logo
radio button. Ensure that a black dot is present inside this circle. The 7812UDXD series converter
modules can support up to ten logo sets that can be recalled when GPIO1 is activated. Using the drop
down menu, select which logo should be recalled when GPIO1 is activated.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Recall User Preset 1
Recall User Preset 2
Recall User Preset 3
Recall User Preset 4
Recall User Preset 5
Recall User Preset 6
Recall User Preset 7
Recall User Preset 8
Recall User Preset 9
Recall User Preset 10
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 83