2.Gain Adjust Channel X; 4.Source Y - evertz 7812UDXD Series Manual

6.46.1.2. Gain Adjust Channel X
The Gain Adjust X control enables the user to set the value of the gain for the selected source. The user
can adjust the gain of the selected source by moving the associate slider control left to decrease the value
or right to increase the value. The value range for the gain adjustments is -24 dB to +24 dB. Gain is
incremented or decremented in 0.1 dB steps.
6.46.1.3. Invert Enable X
This control enables the user to invert the phase or pass the selected audio channel. The Invert Enable X
drop down menu appears as follows:
Normal
Invert
6.46.1.4. Source Y
The Source Y control enables the user to select the source of audio from which the 5.1 surround sound
audio will be generated. Use the drop down menu to select the appropriate source. The following are the
available sources of audio. There are six sources of audio that feeds the up-mixing process: L Source, R
Source, C Source, LFE Source, Ls Source, and Rs Source and two passthru Channels left and right. Any
audio sent to the stereo passthru will be delayed the same and the other channels but will remain
unchanged. Each of these sources can be assigned a specific channel of audio using the appropriate
drop down menu. For sake of brevity, only the L Source selection process is shown.
To assign a channel to L Source, navigate to the source and select a channel from the adjacent drop
down menu. The following sources of audio are available:
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Pass the audio channel through with no processing.
Invert the phase of the audio channel.
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 159