3.Dolby Metadata Missing Preset Trigger; Program Config Assert; Program Config De-Assert - evertz 7812UDXD Series Manual

6.30.1.3. Dolby Metadata Missing Preset Trigger
The Dolby Metadata Missing Trigger is used to trigger presets saved to the module when the absence
of Metadata is detected. The following selections are available:
None
User Preset 1- 10

6.30.2. Program Config Assert

The Program Config Assert is used to allow the user to select a specific user defined preset with a
presence of a specific Program Mode. Each of the different program modes can select any of the 10 user
defined presets.

6.30.3. Program Config De-assert

The Program Config De-assert is used to allow the user to select a specific user defined preset with the
absence of a specific Program Mode. Each of the different program modes can select any of the 10 user
defined presets.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
When set to None, the module will not trigger a preset on Dolby absence.
When set to User Preset 1 through 10 when the absence of Dolby signal is
detected the corresponding preset will be applied to the module.
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 95