evertz 7812UDXD Series Manual page 93

There are numerous pre-defined aspect ratio conversions available, as well as the ability to define custom
aspect ratio conversions. When the User Aspect mode is selected, the user can set input image cropping
and output image size on a pixel-by-pixel and line-by-line basis.
Full Raster
User Aspect
4:3 Side Panel to 16:9 TB Cut
13:9 Letter Box to 16:9 TB Cut
14:9 Letter Box to 16:9 TB Cut
13:9 Stretch to 16:9 TB Cut
14:9 Stretch to 16:9 TB Cut
16:9 Stretch to 16:9 TB Cut
13:9 Stretch to 4:3 Side Panel
14:9 Stretch to 4:3 Side Panel
16:9 Stretch to 4:3 Side Panel
4:3 to 4:3 Side Panel on 16:9
4:3 to 13:9 Stretch on 16:9
4:3 to 14:9 Stretch on 16:9
4:3 to 16:9 Stretch on 16:9
4:3 to 13:9 Crop on 16:9
4:3 to 14:9 Crop on 16:9
4:3 to 16:9 Crop on 16:9
16:9 to 16:9 Letter Box on 4:3
16:9 to 14:9 Letter Box on 4:3
16:9 to 13:9 Letter Box on 4:3
16:9 to 4:3 Side Cut on 4:3
16:9 to 4:3 Squeeze on 4:3
16:9 Top Letter Box on 4:3 to 16:9
14:9 Top Letter Box on 4:3 to 16:9 TB Cut
14:9 Top Letter Box on 4:3 to 14.9 Side Panel
14:9 Top Letter Box on 4:3 to 16:9 Stretch on
16.9
16:9 Top Letter Box on 4:3 to 16:9
14.9 Letter Box on 4:3 to 16:9 TB Cut
14:9 Letterbox on 4:3 to 14.9 Side Panel
14.9 Letterbox on 4.3 to 16.9 Stretch on 16.9
4.3 Side Panel on 16.9 to 4:3
14.9 Side Panel to 14.9 Letter Box on 4:3
14.9 Side Panel to 4:3 Side Cut on 4:3
14.9 Side Panel to 4.3 Squeeze on 4.3
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Revision 1.1.1
7800/7700 MultiFrame Manual
Converts the full input raster to full output raster. If
the input and output aspect ratios are not equivalent,
there will be aspect distortion.
Converts the region of the input raster defined by the
Input H & V Start and Stop values to the region of
the output raster defined by the Output H & V Start
and Stop values with coloured side panels.
These settings convert the input picture to 16:9 top
and bottom cuts. Note: For 1080i/1035i inputs,
these functions only work in field mode.
These settings squeeze common stretched input
video back to 4:3 side panel images on a 16:9
aspect raster.
These settings are common upconverter settings for
converting 4:3 aspect ratio images to common 16:9
formats. These settings are not appropriate for cross
or down conversion.
These settings are common down converter settings
for converting 16:9 aspect ratio images to common
4:3 formats. These settings are not appropriate for
cross or up conversion.
Page - 79