Aes Audio Control Tab; Aes Audio Control; 1.Delay Select; C-Bit Processing - evertz 7812UDXD Series Manual

Mixer
Dolby Encoder A
Dolby Encoder B

6.40. AES AUDIO CONTROL TAB

The AES Audio Control menu is used to select which path is used for the output delay baseline for the
audio output and to specify C bit processing modes.

6.40.1. AES Audio Control

6.40.1.1. Delay Select
The Delay Select control allows the user selectable delay matching to a particular output path. Select
Embedder A to match the delay of the AES output audio with the video processing delay with Path 1.
Select Embedder B match the delay of the AES output audio with the video processing delay with Path 2
Disable
Enable

6.40.2. C-Bit Processing

6.40.2.1. C-Bit Control
This control enables the user to set the C-Bit Control.
Using the C-Bit Control drop down menu, the user can select from the following options:
Preserve This option preserves/passes the C-Bit settings from audio inputs to audio outputs.
Replace This option replaces the C-Bit settings.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Select this option to output audio from the Audio mixers on the Audio Proc Tab
Select this option to output Encoded audio from the Dolby Encoder in slot A
Select this option to output Encoded audio from the Dolby Encoder in slot B

Figure 6-45: AES Audio Control Tab

Audio embedding for group 1 will be disabled.
Audio embedding for group 1 will be enabled.
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 141