Table of Contents
Advertisement
7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
6.2.1.7.
Main PGM Source (-F option only)
The Main PGM Source control selects whether the Main PGM source will be on the PGM IN A BNC or
from the PGM IN A SFP (fiber) module. In this control, select Electrical to process video supplied on PGM
IN A BNC through the main up/down/cross conversion paths. Select Optical to process video supplied on
PGM IN A SFP input through the main up/down/cross conversion paths. The drop down for Main PGM
Source appears as follows:
6.2.1.8.
Backup PGM Source (-F option only)
The Backup PGM Source control selects whether the Backup PGM source will be on the PGM IN B BNC
or from the PGM IN B SFP (fiber) module. In this control, select Electrical to process video supplied on
PGM IN B BNC through the main up/down/cross conversion paths. Select Optical to process video
supplied on PGM IN B SFP input through the main up/down/cross conversion paths. The drop down for
Backup PGM Source appears as follows:
6.2.1.9.
Fill Output Path
The Fill Output Path allows the user to select which output path they would like the side panel fill to be
on. One of the final stages of processing includes keying of the FILL input or embedded compact flash
content onto the output image (+F or +CF2G option only). With the +F option, the PGM B input is used to
supply a FILL input signal that can be keyed into unused portions of the output image raster (i.e. side
panels typically generated when converting from 4:3 to 16:9). When operating in this mode, the FILL input
signal is automatically frame synchronized so that pre-timing of FILL input signals is not required. With
the +CF2G option, static or animated side panels may be stored in the on-board compact flash to be
keyed into image side panels. The drop down for Fill Output Source appears as follows:
Page - 30
Revision 1.1.1
Advertisement
Table of Contents
