Program Configuration Control; Figure 6-54: Program 1 Configuration View - evertz 7812UDXD Series Manual

7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
The internal IntelliGain engine will analyze the value of the Detected Program Config Source. This
value will determine how many Program VistaLINK tabs are to be accessible.
®
For example, if IntelliGain detects a program configuration source of 5.1 + 2, then 2 program
configuration tabs will be user accessible. However, if IntelliGain detects a program configuration
source of 1 + 1 + 1 + 1 then 4 program configuration tabs will be accessible.
Figure 6-54 identifies up to eight program configuration tabs that are accessible via the VistaLINK NMS.
®

Figure 6-54: Program 1 Configuration View

6.50.1. Program Configuration Control

As IntelliGain detects valid audio programs, the VistaLINK program configuration tabs will become
®
activated. The user interface and program configuration tabs are identical.
Page - 171
Revision 1.1.1