2.Metadata Program Select; 3.Ac-3 Bitrate Control - evertz 7812UDXD Series Manual

6.33.1.2. Metadata Program Select
With this control, you can select which metadata program the Dolby Encoder should use.
AC-3 can only encode one program, but Dolby-E metadata can contain information for up to 8 programs.
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
6.33.1.3. AC-3 Bitrate Control
With this control, you can select the output bit-rate for the encoded AC-3 output. Please note, not all bit-
rates are applicable for all AC-3 audio coding modes. Auto-384 will automatically select a bit-rate
appropriate for the audio coding mode of the AC-3 encoder. For more information regarding available
bitrates, refer to the AC3 description above.
224 kbps
256 kbps
320 kbps
384 kbps
448 kbps
512 kbps
576 kbps
640 kbps
Automatic 384 kbps
Automatic 448 kbps
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Selects program 1 for the source of Dolby Metadata.
Selects program 2 for the source of Dolby Metadata.
Selects program 3 for the source of Dolby Metadata.
Selects program 4 for the source of Dolby Metadata.
Selects program 5 for the source of Dolby Metadata.
Selects program 6 for the source of Dolby Metadata.
Selects program 7 for the source of Dolby Metadata.
Selects program 8 for the source of Dolby Metadata.
Select 224 kbps to encode the audio at 224 kbps
Select 256 kbps to encode the audio at 256 kbps
Select 320 kbps to encode the audio at 320 kbps
Select 384 kbps to encode the audio at 384 kbps
Select 448 kbps to encode the audio at 448 kbps
Select 512 kbps to encode the audio at 512 kbps
Select 576 kbps to encode the audio at 576 kbps
Select 640 kbps to encode the audio at 640 kbps
Select Automatic 384 kbps to encode the audio at 384 kbps
Select Automatic 448 kbps to encode the audio at 448 kbps
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 119