Table of Contents
Advertisement
6.5.1.3.
DMX Loss of Video Mode
This control enables the user to set the action that the 7812UDXD series module will take when there is a
loss of input video. If the video is lost, you may choose to mute the output audio or choose to pass AES
input audio.
Mute
Setting this control to Mute will mute the audio if there is a loss of video.
Setting this control to Pass AES will enable the user to pass the AES audio when the
Pass AES
input video is lost.
6.5.2. Audio Monitor
The Audio Monitor section enables the user to view video and audio parameters that are monitored.
This section is for read-only purposes and the parameters herein cannot be modified.
6.5.2.1.
Dolby Slot Monitor A
This parameter will indicate the Dolby Decoder/Encoder modules detected on boot up in the Dolby Module
slot A closest to the module ejector on the card.
6.5.2.2.
Dolby Slot Monitor B
This parameter will indicate the Dolby Decoder/Encoder modules detected on boot up in the Dolby Module
slot B closest to the rear connector on the card.
6.5.2.3.
SRC Status
The SRC Status parameter displays the status of the Sample Rate Converters. The SRC status will
display either Enable or Bypass.
6.5.2.4.
Audio Delay
The Audio Delay parameter displays the delay of the audio in ms.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 37
Advertisement
Table of Contents
