evertz 7812UDXD Series Manual page 21

+3D • VIDEO CONTROL Tab
Under "Video Input Control", if Input source is in either 3D modes video delay for each
path will show and Video Output Controls for path 2 are disabled.
• DEINTERLACER Tab
When either 3D mode is enabled on the Video Tab in "Video Input Source", deinterlacer
controls are disabled.
• SCALER Tab
Under "Conversion", when "Input Source" on the video tab is set to either 3D mode, 3D
mode formatting becomes available.
• NOISE CONTROL Tab
When either 3D mode is enabled on the Video Tab in "Video Input Source", noise
controls are disabled.
+DD Note: The +DD and +DD2 option is only valid on –AES variations of 7812UDXD
modules
+DD2
• DOLBY DECODER CONTROL Tab
The Dolby Decoder Control tab contains configurations for the Decoder source from
incoming AES or DMX audio. Video sync sources, Dolby delay compensation, Dolby
switch suppression, user preset recalls on present/missing incoming Dolby and Dolby
audio channel delay.
Note: There are two Dolby Decoder/Encoder module slots on the 7812UDXD-AES8
version of the module. +DD indicates the first Dolby slot and +DD2 indicates the
second Dolby slot.
+DDE Note: The +DDE and +DDE2 options are only valid on –AES variations of 7812UDXD
+DDE2 modules
• DOLBY E ENCODER CONTROL Tab
The Dolby E Encoder control tab contains the configurations for Dolby encoder line
phase adjustments, Auto program configuration delay compensation and data width
• DOLBY E ENCODER MIXER CH1–CH4/CH5-CH8 Control Tab
All selectable options under "Source X" and "Source Y", channel gain controls, and
channel inversion
Note: There are two Dolby decoder/Encoder module slots on the 7812UDXD-AES8
version of the module. +DDE indicates the first Dolby slot and +DDE2 indicates
the second Dolby slot.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 7