Table of Contents
Advertisement
7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
6.2.
VIDEO CONTROL TAB
The Video control tab is mainly used to configure the frame rate and source of video, the input and output
video standards, the source of video reference and frame sync output timing. In addition, 3G Dual link
Channel swapping, Fill output path and loss of video mode controls can be found here.
Figure 6-1: Video Tab
6.2.1. Video Input Control
6.2.1.1.
Frame Rate
This control sets the module for the specified frame rate as to which the module will be running. The
module is not capable of converting between 59.94/60 Hz and 50 Hz related frame rates. The drop down
menu for the Frame Rate appears as follows:
Page - 26
Revision 1.1.1
Advertisement
Table of Contents
