Table of Contents
Advertisement
8.2.
VISTALINK
MONITORED PARAMETERS
®
The following parameters can be remotely monitored through the VistaLINK
Parameter
Main PGM IN BNC Video Std
Backup PGM IN BNC Video Std
Input Video BNC
Video Payload ID
External Genlock Standard
Video Delay
CDP Parser
Input AFD Code Status
Output AFD Code Status
SRC Status
Audio Delay
Video Delay
Status A
Status B
8.3.
VISTALINK
CONTROLLED PARAMETERS
®
Parameter
Video Standard Input
Video Standard Output
Video Input Source
SD Blanking
Reference Select
V Phase Offset
H Phase Offset
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Description
Reports if a valid video signal is presented to PGM IN A and what
standard has been detected when it is present.
Reports if a valid video signal is presented to PGM IN B and what
standard has been detected when it is present.
Reports what input BNC has been selected to pass through the
main up/down/cross conversion path.
Reports if a valid Video Payload ID ANC packet has been detected
and indicates the format that the video is being sent to the card.
Reports if a valid video reference has been supplied to the REF IN
BNC and indicates the standard that is detected when a valid
reference is applied.
Reports video delay through the card in ms.
Displays the status of Closed Caption reading.
Reports any detected AFD values on the incoming video signal.
Presents the AFD code being stamped on the output of the card (if
applicable).
Displays the status of the Sample Rate Converters.
Displays the delay of the audio in ms.
Displays the delay of the associated video in ms.
Displays whether Status A is on or off.
Displays whether Status B is on or off.
Table 8-1: VistaLINK
®
Description
Selects the video input standard.
Selects the video output standard.
Selects source of video input.
Last line of blanking in SD. SD input only.
Set video or external genlock for card locking.
Sets the vertical phase.
Sets the horizontal phase.
Revision 1.1.1
7800/7700 MultiFrame Manual
Monitored Parameters
interface.
®
Page - 191
Advertisement
Table of Contents
