evertz 7812UDXD Series Manual page 38

7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Encoder A/B – Both Dolby AC3 Mixer controls for +AC3E and +AC3E2 can be
controlled from this tab. The displayed configurations will be for the selected radial
button. If the radio button is grayed out this option is not installed.
Dolby AC3
Encoder Mixer
Ch1 – Ch4/Ch5 – Ch8 - All selectable options under "Source X" and "Source Y",
channel gain controls, and channel inversion.
Embedded Audio
Configuration for selecting the audio output pair sources including mixer outputs or
Output Dolby Encoded outputs (+DEE or + AC3E only).
Path 1 and 2 -
Channels 1 - 4 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH1, CH2, CH3, CH4.
Channels 5 - 8 - Configuration for channel swapping, audio gain, audio inversion
Embedded Audio
and mono mixing for outbound audio channels CH5, CH6, CH7, CH8.
Output Mixer
Channels 9 - 12 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH9, CH10, CH11, CH12.
Channels 13 - 16 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH13, CH14, CH15, CH16.
AES Audio Configurations used to select the Delay source from path 1 or path 2 and C-bit
Control processing.
Channels 1 - 4 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH1, CH2, CH3, CH4.
Channels 5 - 8 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH5, CH6, CH7, CH8.
AES Audio Mixer
Channels 9 - 12 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH9, CH10, CH11, CH12.
Channels 13 - 16 - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels CH13, CH14, CH15, CH16.
AES Audio Configuration for selecting the audio output pair sources including mixer outputs or
Dolby Encoded outputs (+DEE or + AC3E only).
Output
Audio Down Mix
Configuration for defining the source audio channels for the 5.1 down-mix process
Control and further defining the down mix type and level parameters.
Channels L, R, C - Configuration for channel swapping, audio gain, audio inversion
and mono mixing for outbound audio channels Left, Right and center.
Audio Down Mix
Mixer Channels LFE, Ls, Rs - Configuration for channel swapping, audio gain, audio
inversion and mono mixing for outbound audio channels Low frequency effect, left
surround and right surround.
Configures the source audio channel for stereo to 5.1 up-mixing and further defining
UpMix Control key up-mix algorithm parameters. Auto Up-mix will automatically detect whether a
stereo or 5.1 audio is applied at the input.
Page - 24
Revision 1.1.1