Vanc Bypass Tab; Vanc Enable; 1.Vanc Bypass Enable; Vanc Bypass - evertz 7812UDXD Series Manual

6.19. VANC BYPASS TAB

6.19.1. VANC Enable

6.19.1.1. VANC Bypass Enable
The VANC Bypass Enable is the main control for bypassing any VANC data seen on the input of the
7812 card. VANC bypass will only work when the input and output standards are the same.

6.19.2. VANC Bypass

6.19.2.1. Line Enable for Lines 11 – 28 for Field 1 and Field 2
Each of these controls will Enable/Disable the blanking for the incoming VANC data on an SD signal on
their corresponding lines and Fields. To black VANC data set to Enable. To allow the VANC data to be
passed on the output select Disable. These controls are only valid when both input/output are set to SD.

NOTE: Each of the individual VANC Bypass line controls will be disabled if the VANC
Bypass Enable control is set to disable.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O

Figure 6-21: VANC Bypass Tab

Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 67