Table of Contents
Advertisement
6.
MODULE CONTROL
The 7812UDXD series of products are controlled using VistaLINK
Ethernet and SNMP control protocols. The 7812UDXD series modules DO NOT HAVE card edge
controls. As a result, 7700FC modules must be installed in all frames that house 7812UDXD series
modules. Refer to the Evertz website for the most recent firmware for the 7700FC. When using
VistaLINK
PRO it is also important to ensure that the most recent 7812UDXD series ".JAR" control file is
®
installed. Refer to the Evertz website for the most recent 7812UDXD series ".JAR" file.
For the sake of brevity, the following sections describe module controls in terms of the parameters found
within the VLPRO screens for the 7812UDXD-AES8-3G-F +F +CF2G +UMX+ICL+IG+3D+DD+DEE2.
As additional features and options are released, additional sections will be appended to this manual to
show those control screens.
6.1.
CONTROL CATEGORIES
Within VistaLINK
, the 7812UDXD series of products have the following main control tabs:
®
CONTROL TAB
DESCRIPTION
Configuration for the source of video, the input and output video standards, the
Video Control
source of video reference and frame sync output timing. The status of several
Tab
monitored video and AFD parameters are also reported in this control tab.
Video Monitor
The status of several monitored video and parameters are reported in this control
Tab
tab.
Configuration for setting audio delay and setting sample rate converter (SRC)
Audio
operating modes. The status of several monitored audio parameters are also
reported in this control tab.
Configuration for selecting which channels of audio (AES or embedded) are
Audio Input
processed internally within the card. Selection of which audio is processed to be
done on a pair by pair basis.
Channel 1 - 8 - Configuration for user correction of the audio input for Ch1 – Ch8
including Gain, inversion and Channel delay.
Audio Input
Correction
Channel 9 - 16 - Configuration for user correction of the audio input for Ch9 – Ch16
including Gain, inversion and Channel delay.
De-interlacer
Configuration for setting key operating modes and key thresholds for the internal
video de-interlacer.
Control
Configuration for setting video proc controls including RGB gains, YCbCr
Video Proc
gains/offsets, Hue, Saturation, Video Level, Gamma and RGB colour legalization.
Colour Legalize
Configuration for Colour Legalizer controls including soft clip enable/disable, Max
(+ICL option)
RGB, Min RGB, high knee, low knee, negative compression, and compression ratio.
Configuration for the image enhancement process including enhancement
Image
enable/disable, detail gain, enhancement limit, horizontal band, vertical intensity,
Enhancement
luma floor and the detail noise floor.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Revision 1.1.1
7800/7700 MultiFrame Manual
PRO. VistaLINK
PRO operates using
®
®
Page - 21
Advertisement
Table of Contents
