Card Edge Controls; Selecting Whether The Module Will Be Controlled From The Local Controls Or Through The Vista Link ® Interface; Table 5-1: Dip Switch Functions; Table 5-2: Vistalink - evertz 7700 Manual

5.

CARD EDGE CONTROLS

The 7760VMS-HD is equipped with an 8 position DIP switch, toggle switch, push button and a 4 character
dot matrix display to allow the user to select various functions.
configuration functions that will normally be set only once such as video standard selection, dot matrix
display orientation, and VistaLINK
a menu system controlled by the toggle switch and push button and displayed on the 4 character dot
matrix display. (See section 6.2)
DIP switch 1 is located at the top of the DIP switch (farthest from to the card ejector). Table 5-1 gives an
overview of the DIP switch functions. Sections 5.1 give a detailed description of each of the DIP switch
functions.
There are two types of DIP switches possible. For slide switches the On (closed)
position is farthest from the front edge of the printed circuit board. For 'piano key'
switches the On (closed) position is down or closest to the printed circuit board.
DIP Switch
1
2
3
4
5
6
7
8
5.1. SELECTING WHETHER THE MODULE WILL BE CONTROLLED FROM THE
LOCAL CONTROLS OR THROUGH THE VistaLINK
The 7760VMS-HD can be controlled using the card edge DIP switches and menu system or remotely via
SNMP using VistaLINK
or controlled using VistaLINK
7700FR-C frame and a 7700FC VistaLINK
DIP switch 1 is used to enable or disable VistaLINK
DIP 1
Off
On
remote control selection. All other card functions are available through
®
Function
VistaLINK or Local Control Selection
®
Reserved – set to Off

Table 5-1: DIP Switch Functions

PRO. See section 8 for a full description of the parameters that can be monitored
®
. VistaLINK control is only available when the card is installed in the 3RU
® ®
Frame Controller card is installed in slot 1 of the frame.
®
CONTROL MODE
Local control mode. The module will be controlled using the DIP
switches and menu system
VistaLINK control mode. The module will be controlled remotely
®
through SNMP.

Table 5-2: VistaLINK

7760VMS-HD HD Video Monitoring Splitter
INTERFACE
®
control.
®

Mode Switch Settings

®
Revision 0.3
7700 MultiFrame Manual
The DIP switch provides basic
Page - 9