2.Video Sync Source; 3.Decoder Mode; 4.Dolby Decoder Output Latency - evertz 7812UDXD Series Manual

7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
6.32.1.2. Video Sync Source
The Video Sync Source allows the user to reference the Dolby decoder output with the output video,
input video or with the modules reference source.
Output Video 1
Input Video
Card Reference
Output Video 2
6.32.1.3. Decoder Mode
The Decoder Mode control is used to select the type of Dolby source to be decoded. A full list of
available options is shown below:
Mute
Dolby Digital – AC3
Dolby E
Decode All
6.32.1.4. Dolby Decoder Output Latency
With this control, you can setup the Dolby Decoder decoded outputs latency.
Minimum
One Frame
Page - 112
The decode will be timed with the video output 1.
The decode will be timed with the input video.
The decode will be timed with the card reference.
The decode will be timed with the video output 2.
The output of the decoder will be muted.
The decoder will only process Dolby AC3 Audio.
The decoder will only process Dolby E Audio.
The decoder will decode both AC3 and Dolby E audio.
Select Minimum to configure the Dolby Decoder for the
minimum possible decoding delay.
Select One Frame to configure the Dolby Decoder for a
decoding delay equivalent to 1 frame of video.
Revision 1.1.1