Table of Contents
Advertisement
7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
6.21.1.6. SMPTE2016-1 Output Line
This control defines the line on which AFD packets will be inserted into the outgoing video signal when
AFD packet insertion is enabled. The user can set the output line using the AFD Output Line slider.
Drag the slider right to increase the value or move it left to decrease the value of the AFD Output Line.
The valid range is from 7 to 24 with a default of line 9.
6.21.1.7. SMPTE2016-1 Bar Output Enable
This control Enables/Disables Bar Data on the output video. Bar data is used with AFD in order to
indicate the exact image size if not exactly 16:9 or 4:3. The following image depicts the drop down menu
with the available controls.
Disable
When set to Disable, Bar Data will not be inserted in to the output video.
When set to Enable, Bar data will accompany the AFD information in the output
Enable
picture.
When set to Auto, the card will automatically respond to the current card
Auto
configuration and insert bar data as needed.
Page - 72
Revision 1.1.1
Advertisement
Table of Contents
