6.Sound Direction Detect Rate; 7.Soft Switch Duration; 8.Stereo Or 5.1 Monitor; 9.Upmix Status Monitor - evertz 7812UDXD Series Manual

7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
6.45.1.6. Sound Direction Detect Rate
The Sound Direction Detect Rate controls the detection rate of sound direction. The up-mixer constantly
calculates the sound image that would be perceived from the stereo audio input. If the sound direction
shifts in the sound image, the up-mixer changes the output sound direction accordingly by switching the
amount of sound going to different speakers. If faster detection rate is selected, the sound direction
switching may sound more dramatic, but may also be felt as unnatural. On the other hand, slower
detection rate would sound dull and uninteresting. To adjust the detection rate of the sound direction, drag
the slider to the right to increase the rate or drag it to the left to decrease the rate.
The value range is 0 to 7 in increments of 1. The default is level 4.
6.45.1.7. Soft Switch Duration
The Soft Switch Duration controls the transition time when the upmix module switches modes from 5.1
bypass to upmix and vice versa. The duration can range from xx ms to xx ms.
6.45.1.8. Stereo or 5.1 Monitor
This monitors the incoming audio to determine if it is 2.0 or 5.1 and will provide this information.
6.45.1.9. Upmix Status Monitor
The Upmix Status Monitor gives a visual representation of what mode the UMX block is currently
running in.
Page - 156
Revision 1.1.1