5.
USER CONTROLS
The 2430GDAC-MWP has a 4 position DIP switch that is used to configure several features. The On
position is down or closest to the side of the unit with the flanges. Table 5-1 gives an overview of the DIP
switch functions.
5.1.1. INPUT SOURCE SELECTION
DIP switch 1 selects the input GLink source.
5.1.2. MEDIA WALL REGION SELECTION
DIP switches 3 and 4 select the region of the overall media wall to display.
When the 2430GDAC-MWP is configured to display a media wall (either in Maestro or when forced by DIP
switch 2), a portion of the entire media wall is displayed on the connected screen. Figure 5-1 shows the
layout of the media wall regions for each of the different screen configurations.
2430GDAC-MWP G-Link D to A Converter for MWP
DIP Switch
Function
1
Fiber/coaxial input select
2
Media wall mode
3
Media wall region select
4
Table 5-1: DIP Switch Functions
DIP 1
Video Source
Off
Fiber Input
On
Coaxial Input
Table 5-2: Input Source Switch Settings
DIP 3
DIP 4
Off
Off
On
On
Table 5-3: Media Wall Region Select Switch Settings
Revision 1.1
Wall Region
Off
4
On
3
Off
2
On
1
2430GDAC-MWP-7