Table of Contents
Advertisement
Detect 3:2
Detect 2:2
Detect 3:2 and 2:2
6.9.
VIDEO PROCESSING TAB
The Video Proc control menu as shown in Figure 6-8 is used to configure parameters associated with the
video processing functions of the converter. There is one set of video processing controls for each output
on the 7812UDXD. Both these sets of controls operate in the same way therefore only controls for output
Video Proc 1 will be described. Sections 6.9.1 to 6.9.1.8 provide detailed information about each of the
menu items.
ALL of these parameters affect the video in real time. H & V frequency bands will
cause hits to the video while a new filter is loaded.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
The video de-interlacer will search for and lock onto embedded 3:2 sequences
and perform inverse 3:2 pull-down to de-interlace the input signal.
The video de-interlacer will search for and lock onto embedded 2:2 sequences
and perform inverse 2:2 pull-down to de-interlace the input signal.
The video de-interlacer will search for and lock onto embedded 3:2 or 2:2
sequences and perform inverse 3:2 or 2:2 pull-down to de-interlace the input
signal.
Figure 6-8: Video Proc Tab
7800/7700 MultiFrame Manual
Revision 1.1.1
Page - 43
Advertisement
Table of Contents
