Table of Contents
Advertisement
3.
INSTALLATION
All 7812UDXD series modules come with a companion rear plate and occupy two slots in the 7800FR
frame or three slots in the 7700FR-C. If a 7812UDXD series module is installed in a 7700FR-C without
the "slot blocker" installed, the card will not power-up and will show RED on its main status LED. For
information on mounting the rear plate and inserting the module into the frame see section 3 of the
7700FR manual. Refer to section 7.3 of this manual for more information on the 7812UDXD series slot
blocker. Refer to Figure 3-1 through Figure 3-4 for 7812UDXD series rear plate layouts.
Note: For proper operation in the 7700FR-C, the on-board "slot blocker" must be
installed in order for the card to power-up.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Figure 3-1: 7812UDXD-AES8-XX Rear Plate View
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 9
Advertisement
Table of Contents
