Table of Contents
Advertisement
7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
6.57. CDP TRAPS CONTROLS
The CDP Traps tab enables the user to enable or disable CDP traps and view trap status. To enable a
particular trap, simply click the box located beside each trap so that a check-mark appears. When a
check-mark is present, the trap is enabled. When a check-mark is not present, the trap is disabled.
If a parameter under the Trap Status is green, then the trap is present. If the parameter is red, then the
trap is missing.
6.58. THUMBNAILS TAB
The 7812UDXD module can be setup to work with the VistaLINK
thumbnail server in order to send video
®
images of the output pictures using the Simple Network Management Protocol (SNMP). Thumbnails can
be configured for each output path. For the sake of brevity only Video Output Path 1 will be described in
the manual.
Figure 6-61: Thumbnails Tab
6.58.1. Video Output 1
6.58.1.1. Thumbnail Transfer
This option allows the user to enable/disable the transfer of thumbnails.
Page - 185
Revision 1.1.1
Advertisement
Table of Contents
