Table of Contents
Advertisement
3.7
PROGRAMMING THE SOFTWARE - THE PARAMETERS MENU
OPERATION
device does not provide a frame pulse.
previously available on DIP switch #7 of the 615 board.
Do not use AUTO rate detect when you have selected IGNORE mode. Select
the correct film transfer rate that you are using.
The following limitations apply when operating the 4025 without
a frame pulse from the telecine.
1. The field dominance for 30 FPS NTSC and 25 FPS PAL
2. The pulldown for 24 FPS NTSC transfers will be random
Do not use IGNORE mode unless your telecine device does not have a frame
pulse available. Using IGNORE mode affects the accuracy of the film frame
numbering.
3.6.6
Resetting the 4025 to Factory Defaults
FACTORY RESET
parameters. Press SHIFT + ENTER when the sub menu screen
is displayed to reset the 4025 to factory defaults. The 4025 will
perform a power-on configuration before returning to the normal
operating mode.
Proceeding with the Factory reset will cause all user configured parameters
including KeyKode head offsets, horizontal char size, user configurations,
etc. to be lost. PROCEED WITH CAUTION!!!
3.7.1
Controlling the KeyKode Jam when the Telecine is in Play
speed
PLAY WINDOW
function when the telecine is in locked play speed.
Model 4025 Film Footage Encoder Manual
transfers is assumed to be field 1.
content changes at the beginning of field 1 of a video frame.
and the 4025 will track the film frames to within +/- 1 frame
of accuracy. In flat bed editing tables and other devices that
do not have a frame pulse available there is usually no real
pulldown of the picture, but rather a blending of pictures as
they change mid-frame.
Is used to reset the 4025 to the factory default
Is used to adjust accuracy of the KeyKode Jam
This function was
That is, the picture
Page 34
Advertisement
Table of Contents
