evertz 7812UDXD Series Manual page 206

7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
3G Dual Link Channel Swap
Loss of Video Mode
FS Only Mode
VITC Read
VITC Write
Time Code Source
Audio Delay
SRC Mode
Embedder Group 1 Enable
Embedder Group 2 Enable
Embedder Group 3 Enable
Embedder Group 4 Enable
C-Bit
DMX loss of video mode
Ch 1+2
Ch 3+4
Ch 5+6
Ch 7+8
Ch 9+10
Ch 11+12
Ch 13+14
Ch 15+16
Source X
Gain Adjust X
Invert Enable X
Source Y
Gain Adjust Y
Invert Enable Y
Deinterlacer Mode
Page - 192
Used when operating with dual link 1080p input signals per
SMPTE 372M.
Selects the action to take when the input video is missing.
Controls the response of the converter when the input and output
formats are the same.
Select decode line for VITC. SD input only.
Select line for VITC insert. SD output only.
Selects the source of Timecode.
Adjusts the audio delay from the card nominal.
Sets mode of sample rate converter.
Enables or disables the Embedder Group.
Enables or disables the Embedder Group.
Enables or disables the Embedder Group.
Enables or disables the Embedder Group.
Enables the user to set the C-Bit Control.
Selects the action that the 7812UDXD series product will take
when there is a loss of video on the input.
Selects the source for internally processed channels 1 and 2.
Selects the source for internally processed channels 3 and 4.
Selects the source for internally processed channels 5 and 6.
Selects the source for internally processed channels 7 and 8.
Selects the source for internally processed channels 9 and 10.
Selects the source for internally processed channels 11 and 12.
Selects the source for internally processed channels 13 and 14.
Selects the source for internally processed channels 15 and 16.
Routes one of the 16 input audio channels to the X input of the
Channel 1 mixer.
Sets the value of the gain from the selected source.
Inverts the phase or passes the selected audio channels.
Routes one of the 16 input audio channels to the Y input of the
Channel 1 mixer.
Sets the value of the gain from the selected source.
Inverts the phase or passes the selected audio channels.
Sets whether the module will perform field or frame based de-
interlacing conversion.
Revision 1.1.1