Cc Fault Trap Controls; Figure 6-60: Cc Fault Traps Tab - evertz 7812UDXD Series Manual

7800/7700 MultiFrame Manual
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O

6.56. CC FAULT TRAP CONTROLS

The CC Fault Traps control enables the user to enable or disable Closed Caption traps and view trap
status. To enable a particular trap, simply click the box located beside each trap so that a check-mark
appears. When a check-mark is present, the trap is enabled. When a check-mark is not present, the trap
is disabled.
If a parameter under the Trap Status is green, then the trap is present. If the parameter is red, then the
trap is missing.

Figure 6-60: CC Fault Traps Tab

Page - 184
Revision 1.1.1