Status Leds; Module Status Leds -Aes8 Version And Non -Aes8 Versions; Figure 5-1: Status Leds - evertz 7812UDXD Series Manual

5.

STATUS LEDS

5.1. MODULE STATUS LEDS –AES8 VERSION AND NON –AES8 VERSIONS
Figure 5-1 depicts status LEDs for the 7812UDX-3G and 7812UDX-AES8-3G series modules. LEDs are
in the same position and perform the same function for all variations of the 7812.
MODULE STATUS: This Green LED will be On when the module is operating properly.
LOCAL FAULT:
PGM A PRESENT:
PGM B PRESENT:
REF PRESENT:
GRP1 PRESENT:
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Headphone Out
(not currently
implemented)
AES2 AES4 AES6 AES8
PRES PRES PRES PRES
AES1
PRES
Module
Status
PGM B GRP 1 GRP 3
PRESENT PRESENT PRESENT
REF GRP 2
PGM A
PRESENT PRESENT
PRESENT
Shaft
Encoder
(not used)

Figure 5-1: Status LEDs

This Red LED will be On when an essential module input is missing or the module
has another fault.
The PGM A PRESENT LED will be green when a valid input signal is present on
the PGM A BNC. It will be red when missing an input signal. It will blink between
red and green when an invalid input signal is presented.
The PGM B PRESENT LED will be green when a valid input signal is present on
the PGM B BNC. It will be red when missing an input signal. It will blink between
red and green when an invalid input signal is presented.
The REF PRESENT LED will be green when a valid reference signal is present on
the FRAME REF. It will be red when missing a reference signal. It will blink
between red and green when an invalid genlock signal is presented. This LED will
also be red when genlocking is turned off (lock to video).
This LED will be Green when embedded audio Group 1 is present and Red when
embedded audio Group 1 is not present.
7800/7700 MultiFrame Manual
AES3 AES5 AES7
PRES PRES PRES
LINK/ACT
GRP 4
10/100
PRESENT
Revision 1.1.1
7812UDX-AES8-3G
7812UDX-AES8-3G
Page - 19