5.Program Play; 6.Dynamic Range Processing - evertz 7812UDXD Series Manual

6.32.1.5. Program Play
With this control, you can setup the Dolby Decoder "Program Play" feature for Dolby E.
No
Yes
6.32.1.6. Dynamic Range Processing
With this control, you can setup the Dolby Decoder dynamic range compression for AC3 (Dolby Digital
only).
Bypass
RF
Line
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
Select No to configure the Dolby Decoder Program Play for
normal (synchronous) operation.
Select Yes to configure the Dolby Decoder Program Play to
enable proper decoding of Dolby-E streams coming off a
VTR that has been sped up by up to 15%. Additional pitch-
shift processing is applied and output latency is forced to
min. NOTE: The Dolby-E stream has to be input via the
external ("backup") AES input.
Select Bypass to configure the Dolby Decoder to bypass
dynamic range processing. Program levels are unaltered.
Select RF to configure the Dolby Decoder to adjust the
dynamic range using a RF (or "strong") dynamic range
compression profile.
Select Line to configure the Dolby Decoder to adjust the
dynamic range using a LINE (or "light") dynamic range
compression profile.
Revision 1.1.1
7800/7700 MultiFrame Manual
Page - 113