2.Line Phase Adjust; 3.Data Width; 4.Auto Program Configuration; 5.Delay Compensation - evertz 7812UDXD Series Manual

6.35.1.2. Line Phase Adjust
This control adjusts the output line phase of the Dolby-E encoder with respect to the input video sync
source.
Adjustments are in increments of 1 line of the sync source.
6.35.1.3. Data Width
20 bits
16 bits
6.35.1.4. Auto Program Configuration
This control selects the program configuration for the automatic operating mode of the Dolby-E encoder.
The control allows the selection of the most commonly used program configurations and enables the
module to generate a default metadata BSI in the Dolby-E stream.
Program # Programs
Config
6x1 6
8x1 8
3x2 3
4x2 4
5.1+2x1 3
5.1 1
5.1+2 2

Table 6-4: Channel Mappings and Program Configurations

6.35.1.5. Delay Compensation
The Dolby Delay Compensation allows the user to ensure that the audio processing matches the video
processing.
7812UDXD Series 3G/HD Up/Down/Cross Converter with Simultaneous Dual Format Outputs and AES I/O
When 20 bits is selected, the data count will be 20 bits wide.
When 16 bits is selected, the data count will be 16 bits wide.
Ch 1 Ch 2 Ch 3
0.L 1.C 2.C
0.C 1.C 2.C
0.L 0.R 2.L
0.L 0.R 2.L
0.L 0.R 0.C
0.L 0.R 0.C
0.L 0.R 0.C
Revision 1.1.1
7800/7700 MultiFrame Manual
Ch 4 Ch 5 Ch 6
3.C 4.C 5.C
3.C 4.C 5.C
2.R
2.R 3.L 3.R
0.LFE 0.Ls 0.Rs
0.LFE 0.Ls 0.Rs
0.LFE 0.Ls 0.Rs
Ch 7 Ch 8
6.C 7.C
1.L 1.R
1.L 1.R
1.C 2.C
1.L 1.R
Page - 127