Doosan DX60R Shop Manual page 785

13. Assemble the cam (26) on the cover (18) and insert it on
one end of the cam shaft (23).
14. Apply Loctite #241 or equivalent material on the surface of
the hexagonal hole set, and tighten it according to the
regulated torque.
15. Assemble the casing [2] (2) on the casing [1] (1).
16. Apply the grease on the top of the push rod (14) and top
of the plug (17).
NOTE:
When applying the grease, use the spoon made
of soft material so that it does not damage the
surface of the push rod and plug.
Travel Contorl Valve
Figure 38
Figure 39
Figure 40
Figure 41
SP001641
Page 19