Doosan DX60R Shop Manual page 359

Reference
Number
1 High-Pressure Fuel Injection Lines
2
3 Return Line-to-Cylinder Head Bolt
4
5 Injection Line Grommet
6 Front Plate or Timing Gear Case
7
8 Fuel Injection Pump Drive Gear Nut
9
Fuel Injection Pump Drive Gear
(DO NOT remove or loosen the four
10
bolts that fasten the injection pump
drive gear to the injection pump
* : Not used for electronically controlled engines.
** : Electronically controlled engines are equipped with a
solenoid valve. As shown in the following figure, electronically
controlled engines use an electronically controlled governor
combined with a solenoid valve (CSD), rack actuator, engine
speed sensor, and other parts.
Engine
Description
Fuel Return Line
Fuel Injector
Gear Case Cover
Lock Washer
Assembly
drive gear hub!)
Reference
Number
11 Coolant Lines for Cold Start Device*
12 Fuel Injection Pump Insulator
13 Diesel Fuel Injection Pump
14 Rear Fuel Injection Pump Support
15 Fuel Filter / Water Separator
16 Electric Fuel Supply Pump
17
18
19
20 Cold Start Device (CSD)**
21 Trochoid Fuel Pump
Figure 249
Description
Fuel Filter
Fuel Filter Housing
Stop Solenoid*
SP001693
Page 179