Doosan DX60R Shop Manual page 593

4. Remove hex. socket bolts (243) (6 bolts) from spindle (2).
NOTE:
Be sure loosen the last two bolts slowly.
5. Remove rear flange (201) from spindle (2).
NOTE: Hold the rear flange with both hand, and gently
lift it straight up; be careful not to cock it while
lifting. Remember, timing plate (109) will come
out with the rear flange.
6. Pull out parallel pins (42) (2 pins) from spindle (2).
7. Remove O-rings (30, 27) from spindle (2).
NOTE:
The removed O-rings should be replaced with
new ones even if they are free from damage.
Travel Motor
Figure 45
Figure 46
Figure 47
SP001686
Page 35