Doosan DX60R Shop Manual page 539

9. Remove brake piston (16) from the casing (1) by using the
special tool for removing the brake piston.
Lift it up straight by using the bolt hole in the brake piston.
10. Pull out friction plate (14, 2EA) and separation plate (15,
1EA) from the casing (1).
11. After placing the motor horizontally, remove the cylinder
block (13) and other associated parts.
Reference Number
8
9
10
11
12
13
When taking out the cylinder block, be careful not to pull
out spring (12).
Be careful not to damage the sliding parts of the cylinder
block, spherical bush and shoe.
12. Remove the retainer plate (8), and the piston assembly (9,
10).
Swing Motor
Description
Retainer plate
Piston assembly
Piston assembly
Spherical bush
Cylinder spring
Cylinder block
Figure 17
Figure 18
Figure 19
Figure 20
SP001630
Page 25