Doosan DX60R Shop Manual page 436

Dynamo
Removal of Dynamo
1. Disconnect the output wire connector from the dynamo.
2. Loosen the V-belt.
PINCH HAZARD!
Carefully rotate the alternator toward the cylinder
block while loosening the V-belt. Failure to comply
may result in minor or moderate injury.
3. Remove the V-belt adjuster from the dynamo bolt (1,
Figure 408).
4. Remove the nut (2, Figure 408) from the gear case stud.
Remove the dynamo.
Disassembly of Dynamo
1. Remove the rear cover (1, Figure 409).
2. Remove the nut (2, Figure 409), lock washer (3, Figure
409), and flat washer (4, Figure 409).
Engine
Page 256
CAUTION
Figure 408
Figure 409
SP001693