Doosan DX60R Shop Manual page 612

3. Install eyebolts to the spindle (2).
4. Lift the spindle (2) with crane, and gently it into the hub
(1).
5. Fasten the fixture jig to the hub (1) and the spindle (2), and
tighten them slowly and equally.
6. Turn the workbench upside down.
Mount RV Gear Assembly
1. Install RV gear (4) In the hub (1).
2. Install the crank shaft (9) (2 shafts) in the hub (1).
NOTE:
Match the inner race of the tapered roller
bearing (22) of the crank shaft (9) with the outer
race hole of the tapered roller bearing (22) fit in
the spindle (2).
3. Install RV gear (4) in the hub (1).
Travel Motor
Page 54
Figure 97
Figure 98
Figure 99
Figure 100
SP001686