Doosan DX60R Shop Manual page 131

12. Tilt up cabin.
Remove a bolt (Figure 2).
Disconnect pilot hoses as required.
Tilt down cabin.
NOTE: Please refer to cabin tilting.
NOTE: Be careful about hydraulic oil leak.
13. Remove seven M8 bolts Then open side cover of main
frame (Figure 3).
Remove front pivot bracket four bolts (M12) and washers
outside of cabin (Figure 4).
Remove two M16 bolts and washers to split tilting lever
from main frame (Figure 5).
14. Remove floor mat.
Cabin
Figure 2
Figure 3
Figure 4
Figure 5
FG013471
FG013818
FG013823
FG013822
SP001623
Page 7