Doosan DX60R Shop Manual page 592

Spur Gear Removal
1. Take out two retaining rings (25) from crank shaft (9).
Be careful when removing the retaining ring. You
could become injured if tip of the pliers comes out of
the retaining ring hole, and the retaining ring jumps
out.
2. Draw out two spur gears (7) from crank shaft (9).
Rear Flange Removal
1. Turn the work bench so rear flange (201) is on top.
2. Loosen plugs (224) (2 plugs).
NOTE:
Temporarily loosen the plugs to make work
easier later.
3. Loosen plugs (226) (2 plugs).
NOTE: Temporarily loosen the plugs to make work
easier later.
Travel Motor
Page 34
CAUTION
Figure 41
Figure 42
Figure 43
Figure 44
SP001686