Doosan DX60R Shop Manual page 595

Disassembly of Plugs Inside Rear Flange
1. Remove two plugs (224) from rear flange (201).
2. From each of the two holes, take out spring (228) and
stopper (225).
3. Remove spool (223) from rear flange (201).
NOTE: To remove, tilt rear flange to let the spool slide
down, catch the spool and slowly pull it out.
4. Remove two plugs (226) from rear flange (201).
5. Remove two springs (230) and two valves (227) from rear
flange (201).
Travel Motor
Figure 51
Figure 52
Figure 53
Figure 54
SP001686
Page 37