Doosan DX60R Shop Manual page 348

Fume / Burn Hazard!
Always read and follow safety related precautions found on
containers of hazardous substances like parts cleaners,
primers, sealants and sealant removers.
Failure to comply could result in death or serious injury.
FLYING OBJECT HAZARD!
Always wear eye protection when servicing the engine and
when using compressed air or high-pressure water. Dust,
flying debris, compressed air, pressurized water or steam
may injure your eyes.
Failure to comply may result in minor or moderate injury.
Pinch Hazard!
Carefully rotate the alternator toward the cylinder block
while loosening the V-belt. Failure to comply may result in
minor or moderate injury.
Never remove or attempt to remove the tamper-proof
devices from the full-load fuel adjusting screw or the high-
speed throttle limit screw on the fuel injection pump and
governor assembly. These adjustments have been made at
the factory to meet all applicable emissions regulations and
then sealed.
Never attempt to make any adjustments to these sealed
adjustment screws. If adjustments are required, they can be
made only by a qualified fuel injection shop that will ensure
the injection pump continues to meet all applicable
emissions regulations and then replace the tamper-proof
seals.
Engine
Page 168
WARNING
CAUTION
CAUTION
CAUTION
Figure 242
Figure 243
Figure 244
FG009153
FG009152
FG009155
SP001693