Doosan DX60R Shop Manual page 419

Introduction
This section of the Service Manual describes the servicing of the
dynamos and alternators. Standard equipment on TNV model
engine is used in this section to show the service procedures
for a representative dynamos and alternators and it may be
different from acfural equipment.
Alternator Specifications
Nominal Output (13.5 Volts Heat)
Weight
Revolution Direction (As Viewed From Pulley)
Rating
Battery Voltage
Rated Revolution
Operating Range
Grounding Characteristics
Integrated Regulator
Outside Diameter of Pulley
Belt Shape
Dynamo Specifications
Nominal Output (13.5 Volts Heat)
Revolution Direction (As Viewed From Pulley)
Grounding Characteristics
Integrated Regulator
Outside Diameter of Pulley
Engine
Weight
Rating
Battery Voltage
Rated Revolution
Operating Range
Belt Shape
40 Amps
6.17 lb (2.8 kg)
Clockwise
Continuous
12 Volts
5,000 rpm (min
1,350 - 18,000 rpm (min
Negative (-) Side of Circuit
IC Regulator
2.724 in. (69.2 mm)
Type A
Negative (-) Side of Circuit
A-Belt
Special M-Belt
Type A or Type Special M
-1
)
-1
)
20 Amps
3.97 lb (1.8 kg)
Clockwise
Continuous
12 Volts
3,500 rpm
1,400 - 6,600 rpm
IC Regulator
2.56 in. (65 mm)
2.28 in. (58 mm)
SP001693
Page 239