Doosan DX60R Shop Manual page 777

4. Disassemble the cover (18) and cam (26) assemble from
the casing [2] (2).
5. Use the torque-wrench to unscrew the screws (25).
NOTE:
Be careful because the loosening torque can be high
from the applied Loctite #242.
6. Align the rot to one end of the cam shaft (23) and lightly
use the hammer to disassemble it.
7. Disassemble the cam (26) from the cover (18) as the
assembly with the steel ball (21) and bush (22) attached.
Travel Contorl Valve
Figure 7
Figure 8
Figure 9
Figure 10
SP001641
Page 11