Doosan DX60R Shop Manual page 430

6. Reinstall the insulation bushing (4, Figure 401) and nut (3,
Figure 401).
7. Reassemble the regulator assembly (1, Figure 401) to the
holder (2, Figure 401).
8. Reinstall the brush holder (3, Figure 402), springs (4,
Figure 402) and brushes (5, Figure 402).
9. Reattach the regulator assembly and holder to the rear
frame housing.
10. Reinstall the rear cover (2, Figure 402) to the rear frame
housing with three bolts (1, Figure 402).
11. Reassemble the pulley (2, Figure 403) and nut (1, Figure
403) to the shaft of the rotor assembly. Tighten the nut.
Engine
Page 250
Figure 401
Figure 402
Figure 403
SP001693