Doosan DX60R Shop Manual page 412

8. Position the brush springs in brush holders (Figure 372).
Reinstall the brushes in the brush holders. Reversing the
brushes will cause the starter motor to turn backwards.
9. Carefully install the brush holder assembly to the armature
assembly.
10. Reinstall the field coil assembly with the armature
assembly to the gear housing.
11. Reinstall the rear cover to the brush holder assembly.
Securely tighten the two bolts.
12. Reinstall the two M4 through bolts (Figure 373). Securely
tighten the through bolts. Reconnect the wire to the
magnetic switch assembly. Tighten the M8 nut. Reinstall
the cover over the connection.
Engine
Page 232
Figure 372
Figure 373
SP001693