8.
Disassemble the dust cover (3, Figure 349) and shift the
lever (4, Figure 349) from the gear housing.
9.
Remove the three M4 bolts (1, Figure 350) securing the
bearing retainer assembly (2, Figure 350) to the gear
housing. Remove the bearing retainer assembly from the
gear housing.
10. Remove the pinion clutch assembly (3, Figure 350) from
the bearing retainer assembly.
11. Using a flat-blade screwdriver, remove the retaining ring
(1, Figure 351) from the shaft of the pinion.
12. Disassemble the pinion stop (3, Figure 352), return spring
(4, Figure 352), pinion clutch assembly (1, Figure 352),
and pinion shaft (5, Figure 352).
Engine
Figure 349
Figure 350
Figure 351
Figure 352
SP001693
Page 225